People often buy ADT sensors for doors and windows but do not know how to remove them. One question that lingers in their mind is how to remove sensors? There are numerous reasons for removing ADT sensors from your home.
Maybe you want to upgrade the sensor or possibly replace the old sensors, or you are shifting to a new house, you will be required to remove ADT sensors. The process of removal of ADT sensors is quite easy. Till the time you have the perfect tool, the process of removing the ADT sensor is very easy.
The ADT window and the door sensors can be removed with the help of razor blades, a sealant remover or a silicone digestant, knife, paint scraper, screwdriver.
No products found.
It is also important that you have some information about the system master code so that there is the least damage. Whether it is a wired or wireless system, removing both is simple.
If you are looking for the answer for how to remove the sensor them read the guide given below.
How Can You Remove ADT Window and Door Sensors?
How to remove the sensor is a question which many people ask for. The answer is straightforward. The command panel and pulse network make the overall process simple.
Before initializing, it is important that you close the zones that are connected to the sensor. You can do this from the command panel menu.
- Go to the “zones” option and then check the list which shows active zones in your house.
- Now select the zone that you want to shut, and then you can enter the code.
- Now the zone which you will select should be shut and removed safely without the alarm being tripped.
How Can You Bypass the Zones with The Help of Other Ad Control Panels?
It is a fact that the entire panel is not the same. ADT comes with a touchscreen panel, but many subscribers are not aware of it, and they haven’t upgraded to this system. In case if you will be shifting to a home that already has an ADT system, then you will have a regular control panel there. The list of control panels can be checked online. But the overall process is very simple.
Only a user code, a number, a three-digit zone number is needed that will deactivate the zone. After the deactivation is done, you can take away the door sensors and window with the help of any way that is feasible for you.
How Can You Remove Wireless ADT Window Sensors and Door Sensors?
People often purchase ADT sensors but do not know to remove sensors from doors and windows. Here are the steps to do so. In this first, you require to place an adhesive, and then you will use a drop of silicone glue when you are installing the ADT sensors. With the help of a razor or knife, you can cut the silicone lining.
By slipping down the adhesive, you can eliminate the sensor with the help of a knife. The silicone can be heated with the help of either a blow dryer or a warm air gun. In case you do not wish to utilize the blade, or you find silicone heavy, then you can employ a silicone sealant remover.
No products found.
Process To Remove ADT Window and Door Sensor Which Is Wired
If you want to know to remove sensors that are wired, read the guide below. The process of this is also the same as above. The only thing required is that the wires should be taken back all the way through the walls. The wires that are present there along the window and door can be detached with the help of a screwdriver.
It is essential to do this for both sensor and control panels. After removing the wire, you can take out the wires from the hole to take them away or make use of them in the future. You can use a lubricant that will remove the silicone.
How To Remove the Lower-Level Wired Sensors?
Some sensors have lower-level wiring in the frame, and this becomes a little irritating to remove them. You can remove it by prying with your fingers or with the help of screwdrivers. This will remove the magnet initially and then the wires.
Sometimes the sensors are also placed inside the wood. Here also you can first remove the magnet and then the plate of the sensor with the help of screws that are present on the base plate.
Replacement Kit
For people who wish to substitute their sensors, ADT customer service can be contacted, which comes along with the repair kit. You can also buy a new sensor and fix it with both side adhesive tape and sealant silicone. This will be a good DIY idea for you.
Conclusion
So as seen, the answer to the question of how to remove sensors is straightforward. You need to know few things to do it properly. It is important to close the apt zones when you remove the ADT sensors from doors and windows.
You can turn down the alarm even if you have opted for 24 hours subscription. However, it is important you have the much-required tools so that you can remove sensors without difficulty.
The overall process will be easy when you have the best tools to do so.
