The ADT products are considered one of the best when it comes to security and monitoring equipment. They offer professional products designed to protect your family, home and property.
Now, if even the slightest problem arises, like an ADT alarm going off for no reason, you should know what to do.
There is probably nothing more annoying than a security alarm going off in the middle of the night without a reason. You might ignore it if this happens only once in a blue moon. However, if it happens often, you must consider the issue and do something about it. After all, nobody would like an alarm that only breaks peace and freaks you out for no reason.
So, if you are also someone looking for ways to fix an ADT alarm going off for no reason, stay right here. We will be discussing everything you can do and should not do when your ADT alarm goes off for no reason.
An ADT alarm going off for no reason will trigger you as well as your neighbors. So, it is quite an issue that should be resolved. An ADT alarm goes off only when its assigned zone has been violated in any way. But if the violation is not the reason, then here are some ways for you to troubleshoot an alarm and find the reason it goes off.
Troubleshooting You Can Do
Go through these troubleshooting ways and check for them in your ADT alarm. The following are the common reasons for an alarm to go off randomly.
Check for Battery or Power Supply Issue
Low battery might be a possible reason for an ADT alarm going off for no reason. The alarm emits an annoying beep when the battery level becomes critical. This sometimes gives out a false alarm. So, you can check your alarm’s battery level, charge it if it has gone low and then observe if it still gives false alarms.
An alarm also goes off if there is an interruption or breakage in the flow of the electrical current of the monitored region or a disturbed power supply. Any basic battery fault is another reason why an alarm could go off randomly. So, checking the battery and power supply of the alarm should be the first thing to do when checking for faults.
Check the Sensors
Security alarms go off when they sense different kinds of violations. There are several sensors that are compiled in a single alarm to provide you the security you need. So, it is important to check the active sensors when you are facing any problem with the alarm.
There are various sensors in a security alarm- motion sensors, carbon monoxide, heat or smoke sensors, glass break-ins, door or window sensors. You will have to troubleshoot all the sensors to detect which sensor has caused the alarm to go off.
Also, ADT security panels indicate if any of the sensors are running low on battery. If you find a low-battery sensor, it might be a possible reason for the alarm going off for no reason.
Bypass the Zone
Simply bypassing a zone can fix your issue for enough time to know the problem. Most probably, ADT security panels allow you to know when there are faulty sensors and tell you which sensor is the one. In this case, you can just bypass the sensor you wish to look at.
If you don’t see any faulty sensor on the panel, it would be better to bypass each device and zone.
Check the ADT Alarm System
Sometimes, an issue with the alarm itself can cause it to go off for no reason. So, to find such a possibility, it is advisable to check the whole system inside out. Go through the sensors of your ADT alarm all over again if needed. Check the wirings thoroughly for any faults.
Moreover, checking out your ADT alarm system thoroughly should be a routine. The system should be checked and observed at least every two-three month to avoid any issues or problems.
These are the ways you can troubleshoot and find a possible issue all by yourself. However, it is not always necessary to find a problem. There is also a possibility that your alarm sensed something and maybe that is the reason it started going off.
Other Possibilities
When talking about a security alarm sensing something, it doesn’t have to always be an unwanted or unfortunate thing. After all, your neighborhood might also be having some non-dangerous elements that may have caused the alarm to go off. Here are some of the possibilities you should consider in the case of an ADT alarm going off for no reason.
Sensing Pets
Your ADT alarm must go off when it senses anything in its monitored area or region. This sensing applies to everyone and everything, including pets and animals. If your area has street dogs or cats, then it might be possible that your ADT alarm sensed one of them roaming around frequently.
However, if your area does not have any street animals, here are some more possibilities.>
The Issue with Power Supply
If the power supply of your ADT alarm is fluctuating or breaking frequently, the alarm will go off for no reason. A sudden loss of power or just interruption in even the slightest way will make your ADT alarm go off anytime.
Sensing Random Objects: It is a great possibility of an ADT alarm going off for no reason when it senses just any random object or moving element in the monitored area or region. Security alarms are usually triggered by random objects mostly at workplaces.
In a residential area, these random objects can be anything. A moving door, moving element in the air or again, street animals, can trigger a security alarm.
Even an open window or moving curtain is enough to make an ADT alarm go off. If anything is moving or disturbing in monitoring of the ADT alarm, it will be triggered by it.
Conclusion
Whether your ADT alarm is going off by sensing something or due to some internal problem, it is an issue in both ways. If your alarm goes off even two to three times in a while, that too without a reason, it is advisable to check through the system inside out.
You obviously do not want anything non-dangerous to bother you in the middle of the night and disturb your peace, right?
So, if you are facing any such problem with your ADT alarm, go check through to find the issue.
If it still goes off after checking through everything, it is always best to contact the company and ask them to check for possible issues.
